MT Micro 10/6 HDPE
Microduct for direct buried
- Recommended cable dimens for blowing from 1,8 to 4,2 mm
| Temperature range to EN 60794-1-22-F1 | Installation -10°C to +50°C, Operation -40°C to +70°C, Storage -40°C to +70°C |
| Outer diameter (OD) | 10 ± 0.1 mm |
| Ovality | max. 5% |
| Inner coefficient of friction | max. 0,1 |
| Thermal expansion | *1,6*10-4 K-1 ISO 11359-2 (-20°C to +70°C) |
| Longitudinal reversion | max. 3% ČSN EN ISO 2505 |
| Weight | 47,5 kg/km |
| Installation tensile force | max. 680N |
| Minimum bending radius | 100 mm |
| Blowing pressure | max. 20 bar |
| Wall thickness (WT) | min. 1,9 mm |
| inner diameter (ID) | min. 5,9 mm |
| Burst pressure | min. 70 bar |
| Crush - pressure force | min. 1000N |
| Crush - residual deformation | max. 15% OD = max. 1,5 mm |
| Impact | No damage after the test, dimens in tolerances after recovery |
| Bending stiffness | min. 0,19 Nm2 |
| Blown ball test (BB test) | Pass |
| Na vyžádání | On request |