Fiber Distribution Hubs MDP OZ 144S, MDP OZ 288S and MDP OZ 432S
| Inputs / Outputs (quantity × range) | 32× 1–5 mm, 4× 3–13 mm |
| Grommets (type and number of used grommets) | 2× express port II. |
| Ingress Protection | IP54 |
| Impact Protection | IK10 |
| Material | polyester / glass fibre |
| Color | light gray RAL 7035 |
| Dimensions (H × W × D) | 1,300 / 1,500 / 1,700 × 245 × 264 mm |
| Weight | 14 / 17 / 20 kg |
| Environment | outdoor |
| Number of Splices | 1–12 13–24 25–48 49–72 73–96 97–144 145–288 289–576 |
| Number of Connectors | only splicing |
| 85GB.00/0000F | MDP OZ 144S | |
| 85GB.20/0000F | MDP OZ 288S | |
| 85GB.40/0000F | MDP OZ 432S | |
| 495630 | Cable base (extension leg pillar) | |
| 85C3.79/000X | KM 4 Kit for Heat Shrinkable Protection | |
| 85C3.82/000X | KM 4 Kit for Crimp Protection | |
| 85C3.81/000X | KM 4 Kit for Ribbon Protection | |
| 85C3.83/000X | KM 6 Kit for Heat Shrinkable Protection | |
| 85C3.85/000X | KM 6 Kit for Crimp Protection | |
| 85C3.84/000X | KM 6 Kit for Ribbon Protection | |
| On request | MDP OZ 144S KM 9 | |
| On request | MDP OZ 288S KM 9 | |
| On request | MDP OZ 432S KM 9 | |
| 85AV.52/000X | KM 9 SC |
The Fiber Distribution Hubs MDP OZ 144S, MDP OZ 288S and MDP OZ 432S are designed to store up to 144/288/432 splices outdoors. The pillars are intended to be installed in an open space within a trench. These pillars are supplied without splice trays. This solution is highly recommended for spliced GPON networks.
- Capacity of up to 144/288/432 splices
- Ability to mix & match the Fiber Optic Trays KM 4, KM 6, KM 9
- KM 4 and KM 6 for up to 24 splices
- KM 9 for up to 12 splices
- Trays are not included in the hub
- Optional placing of PLC Splitters (outside a tray)
- FibeRoadTM System compatible
- Three-point lock
- Cable rings for placing cable reserves
- Hingeable/removable splicing section
- Ability to gradually add trays as required
- Integrated microduct holder in the base
- Modular pillar height based on the maximum capacity
- Compact solution (footprint of only 264 × 245 mm)
- Suitable for ribbon fibers
- Support for midspan (loop-through) cable
Featured Products from the Category
The Fiber Distribution Hubs MDP OZ 144S, MDP OZ 288S and MDP OZ 432S are designed to store up to 144/288/432 splices outdoors. The pillars are intended to be installed in an open space within a trench. These pillars are supplied without splice trays. This solution is highly recommended for spliced GPON networks.