Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S

Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S
  • Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S
  • Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S
  • Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S
  • Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S
  • Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S
  • Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S
  • Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S
  • Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S
  • Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S
Photo Gallery
Inputs / Outputs (quantity × range) 5 / 6 / 6× 8–16 mm
Grommets (type and number of used grommets) 5 / 6 / 6× PG16
Ingress Protection IP65
Impact Protection IK08
Material ABS
Color light gray RAL 7035
Dimensions (H × W × D) 400 × 300 × 170 mm / 500 × 400 × 170 mm / 600 × 400 × 200 mm
Weight 4 / 5.5 / 6.5 kg
Environment indoor
outdoor
Number of Splices 1–12
13–24
25–48
49–72
73–96
97–144
145–288
Number of Connectors only splicing
85TA.00/0000F MDB FA 144S
85TA.10/0000F MDB FA 192S
85TA.20/0000F MDB FA 288S
496041 Key Lock (set of 2 pcs needed)
85C3.79/000X KM 4 Kit for Heat Shrinkable Protection
85C3.82/000X KM 4 Kit for Crimp Protection
85C3.81/000X KM 4 Kit for Ribbon Protection
85C3.83/000X KM 6 Kit for Heat Shrinkable Protection
85C3.85/000X KM 6 Kit for Crimp Protection
85C3.84/000X KM 6 Kit for Ribbon Protection

The Fiber Optic Boxes MDB FA 144S, MDB FA 192S and MDB FA 288S are designed for the placement of 144/192/288 optical splices indoors and outdoors. A pole holder can be attached. It is a very suitable solution for spliced GPON networks.

  • Maximum capacity of 144/192/288 splices
  • Cable rings
  • Placement of a large slack inside the cable management
  • Removable splicing part
  • FibeRoad™ System
  • Modular capacity increase
  • Possibility of placing PLC splitters inside the management (outside the trays)
  • Possibility KM 4 trays or KM 6 trays for 24 splices
  • Possibility KM 9 trays for 12 splices
  • Possibility of using ribbon fibers