Fiber Distribution Hubs MDP OZ 24/48, MDP OZ 48/96 and MDP OZ 72/144
Inputs / Outputs (quantity × range) | 32× 1–5 mm, 4× 3–13 mm |
Grommets (type and number of used grommets) | 2× express port II. |
Ingress Protection | IP54 |
Impact Protection | IK10 |
Material | polyester / glass fibre |
Color | light gray RAL 7035 |
Dimensions (H × W × D) | 1,300 / 1,500 / 1,700 × 245 × 264 mm |
Weight | 14 / 17 / 20 kg |
Environment | outdoor |
Number of Splices | 1–12 13–24 25–48 49–72 73–96 97–144 145–288 |
Number of Connectors | 1–12 13–24 25–48 49–72 73–96 97–144 145–288 |
Connector Type | LC SC |
85GB.10/0000F | MDP OZ 24/48 |
85GB.30/0000F | MDP OZ 48/96 |
85GB.50/0000F | MDP OZ 72/144 |
495630 | Cable base (extension leg pillar) |
85C3.79/000X | KM 4 Kit for Heat Shrinkable Protection |
85C3.82/000X | KM 4 Kit for Crimp Protection |
85C3.81/000X | KM 4 Kit for Ribbon Protection |
85AV.94/0000F | KM 5 Kit for Heat Shrinkable Protection |
85AV.94/00K2F | KM 5 Kit for Crimp Protection |
85AV.94/00R3F | KM 5 Kit for Ribbon Protection |
85C3.83/000X | KM 6 Kit for Heat Shrinkable Protection |
85C3.85/000X | KM 6 Kit for Crimp Protection |
85C3.84/000X | KM 6 Kit for Ribbon Protection |
85C3.86/000X | KM 7 Kit for Heat Shrinkable Protection |
85C3.88/000X | KM 7 Kit for Crimp Protection |
85C3.87/000X | KM 7 Kit for Ribbon Protection |
The Fiber Distribution Hubs MDP OZ 24/48, MDP OZ 48/96 and MDP OZ 72/144 are designed for the placement of 24/48/72 SC connectors or 48/96/144 LC connectors outdoors (for trays KM 5). The pillars are to be installed in an open space in trench. They are supplied without the splice trays. The pillars are recommended for spliced GPON networks.
- Capacity of up to 72/168/264 splices (for KM 4, KM 6)
- Capacity of up to 24/48/72× SC or 48/96/144× LC connector (for KM 5)
- Capacity of up to 24/56/88× SC or 48/112/176× LC connector (for KM 7)
- Compact solution (footprint 264 × 245 mm)
- Modular pillar height based on the maximum capacity
- Three-point lock door
- Duct holder in the basement
- Cable rings for placing cable reserves
- Hingeable/detachable splicing/patching plate
- FibeRoad™ System
- Possibility of adding trays as your network grows
- Possibility of placing PLC splitters in the management (outside the trays)
- Possibility to combine trays KM 4, KM 5, KM 6, KM 7
- KM 4 and KM 6 for up to 24 splices
- KM 5 for up to 12× SC / 24× LC connector
- KM 7 for up to 8× SC / 16× LC connector (for GPON)
- Optional ribbon splice holders
- Possibility of loop cable
- Max. 4 pcs PLC Splitters ABS