Fiber Distribution Hubs MDP EL 432/864 and MDP EL 576/1152
| Inputs / Outputs (quantity × range) | MDP EL 432/864: 2× 4–22 mm, 12× 3–13 mm, 96× 1.8–5 mm or 48× 11–12 mm MDP EL 576/1152: 4× 4–22 mm, 16× 3–13 mm, 128× 1.8–5 mm or 64× 11–12 mm |
| Grommets (type and number of used grommets) | MDP EL 432/864: 1× oval grommet for undivided cable, 6× express port II. MDP EL 576/1152: 2× oval grommet for undivided cable, 8× express port II. |
| Ingress Protection | IP54 |
| Impact Protection | IK10 |
| Material | glass reinforced polyester SMC |
| Color | light gray RAL 7035 |
| Dimensions (H × W × D) | MDP EL 432/864: 1,600 × 900 × 350 mm MDP EL 576/1152: 1,600 × 1,200 × 350 mm |
| Weight | MDP EL 432/864: 75 kg MDP EL 576/1152: 90 kg |
| Environment | outdoor |
| Number of Splices | 1–12 13–24 25–48 49–72 73–96 97–144 145–288 289–576 577–864 865 and more |
| Number of Connectors | 1–12 13–24 25–48 49–72 73–96 97–144 145–288 289–576 577–864 865 and more |
| Connector Type | LC SC |
| 859Y.45/0000F | MDP EL 432/864 | |
| 859Y.40/0000F | MDP EL 576/1152 | |
| 8507.52/0000F | Holder of Thick-Walled Microducts | |
| 85C3.79/000X | KM 4 Kit for Heat Shrinkable Protection | |
| 85C3.82/000X | KM 4 Kit for Crimp Protection | |
| 85C3.81/000X | KM 4 Kit for Ribbon Protection | |
| 85AV.94/0000F | KM 5 Kit for Heat Shrinkable Protection | |
| 85AV.94/00K2F | KM 5 Kit for Crimp Protection | |
| 85AV.94/00R3F | KM 5 Kit for Ribbon Protection | |
| 85C3.83/000X | KM 6 Kit for Heat Shrinkable Protection | |
| 85C3.85/000X | KM 6 Kit for Crimp Protection | |
| 85C3.84/000X | KM 6 Kit for Ribbon Protection | |
| 85C3.86/000X | KM 7 Kit for Heat Shrinkable Protection | |
| 85C3.88/000X | KM 7 Kit for Crimp Protection | |
| 85C3.87/000X | KM 7 Kit for Ribbon Protection |
The Fiber Distribution Hubs MDP EL 432/864 and MDP EL 576/1152 are designed to store up to 1,728/2,304 splices and to terminate up to 576/768 fibers with SC connectors or 1,152/1,536 fibers with LC connectors using the FibeRoadTM System. It is a modular solution without cable splitters and without drawing into protective tubes. The MDP EL can be used as a distribution point for all types of networks.
- Capacity of up to 1,728/2,304 splices (for KM 4 and KM 6)
- Capacity of up to 432×/576× SC or 864×/1,152× LC connector (for KM 5)
- Capacity of up to 576×/768× SC or 1,152×/1,536× LC connector (for KM 7)
- Ability to mix & match the Fiber Optic Trays KM 4, KM 5, KM 6, KM 7
- KM 4 and KM 6 for up to 24 splices
- KM 5 for up to 12× SC / 24× LC connector
- KM 7 for up to 8× SC / 16× LC connector (for GPON)
- Ability to gradually add trays as required
- Modular solution without cable splitter functionality
- Optional placing of PLC Splitters (outside a tray)
- Up to 18/24 PLC Splitters ABS (length 3 m)
- FibeRoadTM System compatible
- Suitable for ribbon fibers
- Three-point lock
- Integrated microduct holder in the base
- Support for installation directly into the trench using the underground base
- Integrated holder for unused buffers
- Support for midspan (loop-through) cable
- Suitable for all types of networks
You might also like
Featured Products from the Category
The Fiber Distribution Hubs MDP EL 432/864 and MDP EL 576/1152 are designed to store up to 1,728/2,304 splices and to terminate up to 576/768 fibers with SC connectors or 1,152/1,536 fibers with LC connectors using the FibeRoadTM System. It is a modular solution without cable splitters and without drawing into protective tubes. The MDP EL can be used as a distribution point for all types of networks.