Fiber Distribution Hubs MDP OZ 144/288 and MDP OZ 288/576
| Inputs / Outputs (quantity × range) | MDP OZ 144/288: 48× MT 7–10 mm, 4× 10–14 mm, 2× 4–22 mm MDP OZ 288/576: 96× MT 7–10 mm, 6× 10–14 mm, 2× 4–22 mm |
| Grommets (type and number of used grommets) | MDP OZ 144/288: 1× microporous grommet for MT, 4× PG16, 1× oval grommet for undivided cable MDP OZ 288/576: 1× microporous grommet for MT, 6× PG16, 1× oval grommet for undivided cable |
| Ingress Protection | IP54 |
| Impact Protection | IK10 |
| Material | polyester / glass fibre |
| Color | light gray RAL 7035 |
| Dimensions (H × W × D) | MDP OZ 144/288: 1,980 × 529 × 342 mm MDP OZ 288/576: 1,980 × 795 × 342 mm |
| Weight | MDP OZ 144/288: 27 kg MDP OZ 288/576: 32 kg |
| Environment | outdoor |
| Number of Splices | 1–12 13–24 25–48 49–72 73–96 97–144 145–288 289–576 577–864 865 and more |
| Number of Connectors | 1–12 13–24 25–48 49–72 73–96 97–144 145–288 289–576 577–864 |
| Connector Type | LC SC |
| 855F.00/001XF | Fiber Distribution Hub MDP OZ 144/288 | |
| 855F.30/001XF | Fiber Distribution Hub MDP OZ 288/576 | |
| 85C3.79/000X | KM 4 Kit for Heat Shrinkable Protection | |
| 85C3.82/000X | KM 4 Kit for Crimp Protection | |
| 85C3.81/000X | KM 4 Kit for Ribbon Protection | |
| 85AV.94/0000F | KM 5 Kit for Heat Shrinkable Protection | |
| 85AV.94/00K2F | KM 5 Kit for Crimp Protection | |
| 85AV.94/00R3F | KM 5 Kit for Ribbon Protection | |
| 85C3.83/000X | KM 6 Kit for Heat Shrinkable Protection | |
| 85C3.85/000X | KM 6 Kit for Crimp Protection | |
| 85C3.84/000X | KM 6 Kit for Ribbon Protection | |
| 85C3.86/000X | KM 7 Kit for Heat Shrinkable Protection | |
| 85C3.88/000X | KM 7 Kit for Crimp Protection | |
| 85C3.87/000X | KM 7 Kit for Ribbon Protection |
The Fiber Distribution Hubs MDP OZ 144/288 and MDP OZ 288/576 are designed to store up to 576/1,152 splices and to terminate up to 144/288 fibers with SC connectors or 288/576 fibers with LC connectors using the FibeRoad™ System (for the Fiber Optic Tray KM 5). It is a modular solution without cable splitters and without drawing into protective tubes. The MDP OZ can be used as a distribution point for all types of networks.
- Capacity of up to 576/1,152 splices (for KM 4 and KM 6)
- Capacity of up to 144×/288× SC or 288×/576× LC connector (for KM 5)
- Capacity of up to 192×/384× SC or 384×/768× LC connector (for KM 7)
- Ability to mix & match the Fiber Optic Trays KM 4, KM 5, KM 6, KM 7
- KM 4 and KM 6 for up to 24 splices
- KM 5 for up to 12× SC / 24× LC connector
- KM 7 for up to 8× SC / 16× LC connector (for GPON)
- Ability to gradually add trays as required
- Ability to remove the subrack and splice outside the hub
- Modular solution without cable splitter functionality
- Optional placing of PLC Splitters (outside a tray)
- Up to 8 PLC Splitters ABS (length 2 m)
- FibeRoadTM System compatible
- Suitable for ribbon fibers
- Three-point lock
- Integrated microduct holder adjacent to the splicing section of the hub
- Support for installation directly into the trench using the underground base
- Integrated holder for unused buffers
- Integrated holder for cables reserves
- Support for midspan (loop-through) cable
- Suitable for all types of networks
You might also like
Featured Products from the Category
The Fiber Distribution Hubs MDP OZ 144/288 and MDP OZ 288/576 are designed to store up to 576/1,152 splices and to terminate up to 144/288 fibers with SC connectors or 288/576 fibers with LC connectors using the FibeRoad™ System (for the Fiber Optic Tray KM 5). It is a modular solution without cable splitters and without drawing into protective tubes. The MDP OZ can be used as a distribution point for all types of networks.