MDB FA 24/48, 48/96, 72/144

MDB FA 24/48, 48/96, 72/144
  • MDB FA 24/48, 48/96, 72/144
  • MDB FA 24/48, 48/96, 72/144
  • MDB FA 24/48, 48/96, 72/144
  • MDB FA 24/48, 48/96, 72/144
  • MDB FA 24/48, 48/96, 72/144
  • MDB FA 24/48, 48/96, 72/144
  • MDB FA 24/48, 48/96, 72/144
  • MDB FA 24/48, 48/96, 72/144
Photo Gallery
Inputs / Outputs (quantity × range) 48× 3 mm, 3× 8–16 mm / 96× 3 mm, 4× 8–16 mm / 144× 3 mm, 4× 8–16 mm
Grommets (type and number of used grommets) 2× PG29, 3× PG16 / 4× PG29, 4× PG16 / 6× PG29, 4× PG16
Ingress Protection IP65
Impact Protection IK08
Material ABS
Color light gray RAL 7035
Dimensions (H × W × D) 400 × 300 × 170 mm / 500 × 400 × 170 mm / 600 × 400 × 200 mm
Weight 2.9 / 4.6 / 6.2 kg
Environment indoor
outdoor
Number of Splices 25–48
49–72
73–96
97–144
Number of Connectors 13–24
25–48
49–72
73–96
97–144
Connector Type LC
SC
85TA.50/0000F MDB FA 24/48
85TA.60/0000F MDB FA 48/96
85TA.70/0000F MDB FA 72/144
496041 Key Lock (set of 2 pcs needed)
85C3.79/000X KM 4 Kit for Heat Shrinkable Protection
85C3.82/000X KM 4 Kit for Crimp Protection
85C3.81/000X KM 4 Kit for Ribbon Protection
85AV.94/0000F KM 5 Kit for Heat Shrinkable Protection
85AV.94/00K2F KM 5 Kit for Crimp Protection
85AV.94/00R3F KM 5 Kit for Ribbon Protection
85C3.83/000X KM 6 Kit for Heat Shrinkable Protection
85C3.85/000X KM 6 Kit for Crimp Protection
85C3.84/000X KM 6 Kit for Ribbon Protection
85C3.86/000X KM 7 Kit for Heat Shrinkable Protection
85C3.88/000X KM 7 Kit for Crimp Protection
85C3.87/000X KM 7 Kit for Ribbon Protection

Optical distribution box MDB FA 24/48, 48/96, 72/144 is designed for the termination of 24/48/72 fibers to SC connectors or 48/96/144 fibers to LC connectors indoors and outdoors. The distribution box can be enhanced by the pole holder and it can store large cable/patchcords reserves.

  • Maximum capacity 24/48/72 SC or  48/96/144 LC
  • Ranging rings
  • Possibility of storing large cable/patchcord reserves inside the distribution box
  • Removable splicing/patching part
  • The FibeRoadTM System
  • Possibility of modular increasing of the capacity 
  • Possibility of placing PLC splittera in the management section (outside the tray)
  • Possibility to combine trays KM 4, KM 5, KM 6
  • Trays KM 4 and KM 6 for 24 splices
  • Tray KM 5 for 12 SC or 24 LC connectors
  • Hinging KM 5 tray for a better handling
  • Possibility of ribbon fibers