Fiber Distribution Hubs MDP OZ 576S and MDP OZ 864S
| Inputs / Outputs (quantity × range) | 32× 1–5 mm, 54× 1.8–5 mm, 12× 3–9 mm, 4× 3–13 mm |
| Grommets (type and number of used grommets) | 2× express port II., 6× express port I. |
| Ingress Protection | IP54 |
| Impact Protection | IK10 |
| Material | polyester / glass fibre |
| Color | light gray RAL 7035 |
| Dimensions (H × W × D) | 1,500 / 1,700 × 276 × 530 mm |
| Weight | 25 / 30 kg |
| Environment | outdoor |
| Number of Splices | 1–12 13–24 25–48 49–72 73–96 97–144 145–288 289–576 577–864 |
| Number of Connectors | only splicing |
| 85GB.60/0000F | Fiber Distribution Hub MDP OZ 576S | |
| 85GB.80/0000F | Fiber Distribution Hub MDP OZ 864S | |
| 85AV.52/000X | Fiber Optic Tray KM 9 SC |
The Fiber Distribution Hubs MDP OZ 576S and MDP OZ 864S are designed to store up to 576/864 splices outdoors. The pillars are intended to be installed in an open space within a trench. These pillars are supplied without splice trays. This solution is highly recommended for spliced GPON networks.
- Capacity of up to 576/864 splices
- 48×/72× Fiber Optic Tray KM 9 for up to 12 splices
- Trays are not included in the hub
- Optional placing of PLC Splitters (outside a tray)
- FibeRoadTM System compatible
- Secured by key lock
- Cable rings for placing cable reserves
- Hingeable/removable splicing section
- Ability to gradually add trays as required
- Integrated microduct holder in the base
- Installation directly into the trench using the underground base
- Compact dimensions
- Support for midspan (loop-through) cable
- Suitable for all types of networks
You might also like
